3) Remove the pinch roller[1].
b) Removing the spur unit
1) When removing the spur unit, first open the top cover, and then remove the roll feed unit, left and right circle
covers, tank cover, right upper cover, operation panel, lower rear cover, right cover, right front cover, upper
front cover, lower front cover, cover guide, upper rear cover, and left and right cover mounting plates.
Refer to DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > External
Covers.
2) Remove the three screws[1], and then remove the mist fan[2].
[1]
F-4-60
[1]
[1]
F-4-61
Chapter 4
[2]
4-35