Canon iPF6100 Service Manual page 187

s) Lower front cover
Removing the lower front cover
1) When removing the lower front cover[3], open the top cover, and then remove the roll feed unit, left circle
cover, tank cover, right circle cover, right upper cover, operation panel, upper front cover, right cover, and
exhaust filter.
2) Remove three screws[1] and release the harness to remove lower front cover[2].
t) Left back cover
Removing the left back cover
1) When removing the left back cover[1], open the top cover, and then remove the roll feed unit, left circle cover,
tank cover, left cover, lower rear cover, lower rear left cover, and left rear cover.
2) Remove the two screws[2], and then remove the left back cover[1].
[1]
[2]
[1]
[1]
F-4-27
[2]
F-4-28
Chapter 4
4-15