Canon iPF6100 Service Manual page 54

Chapter 1
Setting Item
(The paper type is [Cutting Mode]
displayed here.)
[Bordless Margin] Adjust the margin during borderless printing.
[CutDustReduct.] Choose On to reduce the amount of debris generated when cutting film
[Manual Feed]
[NearEnd Sht
Mrgn]
[Return Defaults] Choose Yes to restore Med.Detail Set. to the factory default values.
1-42
Description, Instructions
Specify if the Cutter Unit is used for cutting.
Choose Automatic to have roll paper cut automatically after printing.
If you choose Eject , the paper will not be cut after printing. Instead, a
line will be printed at the cut position.
and similar media by printing a line at the cut position. This option
reduces the amount of debris given off after cutting.
Choose how the paper is supplied, Top for printing from the Tray or
Front for printing from the Front Paper Feed Slot .
Specify a margin at the leading edge of sheets to ensure better printing
quality at the leading edge.
Note that if you choose 3 mm , it may lower the printing quality at the
leading edge and affect feeding accuracy. The printed surface may be
scratched, and ink may adhere to the the leading edge.
If you have selected 20 mm , the test print sheet may not be printed
completely.