Details Of Service Mode - Canon iPF6100 Service Manual

Chapter 7

7.1.3 Details of Service Mode

This section provides details of the Service mode menu.
a) DISPLAY
Displays and prints the printer information.
1) PRINF INF
Prints adjustment values in the User menu, [DISPLAY] and [COUNTER] parameters on A4-size or lager paper.
When a roll media is used, the layout is optimized according to the media width.
2) SYSTEM
Displays the printer information shown below.
Display
S/N Serial number of printer
TYPE Type setting on main controller PCB
* iPF6100 is represented by 24.
LF TYPE Feed roller type: 0 or 1
TMP Ambient temperature
SIZE LF Detected size of loaded media (feed direction)
0 is always detected for the roll media.
SIZE LF Detected size of loaded media (feed direction)
0 is always detected for the roll media.
SIZE CR Detected size of loaded media (carriage scan direction)
SIZE CR Detected size of loaded media (carriage scan direction)
3) HEAD
Displays the following EEPROM information of the printhead.
Display
S/N R Serial number of printhead R
S/N L Serial number of printhead L
LOT R Lot number of printhead R
LOT L Lot number of printhead L
7-12
T-7-6
Description
T-7-7
Description
0016-8435
Unit
-
-
-
degrees
C
mm
inch
mm
inch