Canon iPF6100 Service Manual page 264

J2512 (Suction fan / Maintenance cartridge relay PCB / Paper detection sensor / Lift cam sensor)
Pin Signal name
Number
4 GND
5 MENT_SDA
6 MENT_SCL
7 GND
8 MENT_3V
9 SNS_3V_1
10 N.C.
11 N.C.
12 N.C.
13 GND
14 PE_SNS
15 SNS_3V_1
16 GND
17 LIFT_CAM_SNS
J2601 (Operation panel)
Pin Signal name
Number
1 POWER_ON
2 PM_START
3 BUZZER
4 PDODATA
5 +3.3V
6 PDI_DATA
7 GND
8 /PANEL RESET
9 GND
10 PDOPCLK
11 SNS_5V
12 /PDOCS_L
J2703 (Auto feed roll unit)
Pin Signal name
Number
1 OPT_5V
IN/OUT Function
- GND
IN/OUT Maintenance cartridge rom control signal (data)
IN/OUT Maintenance cartridge rom control signal (clock)
- GND
Power supply (+3.3V)
OUT Power supply (+3.3V)
- N.C.
- N.C.
- N.C.
- GND
IN Paper ditection sensor output signal
OUT Power supply (+3.3V)
- GND
IN Lift cam sensor output signal
T-6-7
IN/OUT Function
IN Power switch signal
OUT Power supply (+5V)
OUT Buzzer control signal
OUT Panel IC control signal
OUT Power supply (+3.3V)
IN Panel IC data signal
- GND
OUT Panel reset signal
- GND
OUT Panel IC clock signal
OUT Power supply (+5V)
OUT Panel supply chip select signal
T-6-8
IN/OUT Function
OUT Power supply (+5V)
Chapter 6
6-7