Siemens SINUMERIK 802D sl Programming And Operating Manual page 59

Optional parameter, gear stage preselection
In the input fields for the relevant manual machining, e.g. thread tapping, it is possible to pre-
select the gear stage (see screenshot below).
Figure 5-21
If a gear unit is installed on the machine, you can select the gear stage using the <SELECT>
key.
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Gear stage preselection
5.4 Manual machining using cycles (functions)
Manual machining
59