Siemens SINUMERIK 802D sl Programming And Operating Manual page 108

Machining the machining step program manually
5.4 Manual machining using cycles (functions)
Figure 6-2
Screen handling functions
"Cursor up / down" With the cursor up/cursor down keys, you can move selected machining steps up and down within
the list. The selected step is displayed on an orange background.
"Cursor right"
If you have selected a machining cycle
opens automatically when you press the cursor key on the right.
Softkeys
Other inputs in the screen are made with softkeys:
Opens the following dialog box:
Figure 6-3
108
Machining step program
"File..." menu
, the input screen for this cycle or the taught block
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Manual Machine Plus Turning