Manual machining
5.4 Manual machining using cycles (functions)
Softkeys
The "Cycle overview" function lists all free contours contained in the machining step
program.
Figure 5-63
To select, place the cursor on the appropriate line and press the "OK" softkey.
It is also possible to assign a contour of an external contour subroutine to the cycle.
Figure 5-64
The "External contours" function opens a dialog box with which the contour subroutine can
be selected. The "OK" softkey function links the selected program with the cycle.
102
Free contour - overview
Add external contours
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Manual Machine Plus Turning