Manual machining
5.2 Display and operator control optios in the main screen for "Manual Machine Plus"
Displayed values
Meaning
•
•
Machining and technology data
You must enter the machining technology data in the following input fields:
Figure 5-3
The machining technology data are as follows:
Parameter
T
F
S
MR
-X
-Z
+X
+Z
Generally speaking, the relevant machining technology data must be entered before
starting manual machining.
36
Feed stop as a result of:
–
Feedrate override at position 0%.
–
An alarm is active which prevents the axes from moving.
Spindle status
–
Spindle counter-clockwise
–
Spindle stop
–
Spindle clockwise
Display box from main screen "Manual Machine Plus", entry of machining technology
data
Description
Tool number of the used tool (only for use of a manual tool-changer system)
Feedrate with choice of units mm/min (time feed) and mm/rev (revolutional feed),
Spindle type with choice of units rev/min (constant spindle speed) and m/min
(constant cutting rate),
Speed limitation for constant cutting rate
Positions of the limit stops, the limit stops can be activated using the toggle field
"ON/OFF"
CAUTION
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Manual Machine Plus Turning