Manual machining
5.3 Manual machining with machining types
Operating sequences
1. You can access the "Manual radius turning" function in the main screen for "Manual
2. Press the "Machining mode" softkey until "Taper turning" is displayed.
3. By pressing the <Cursor keys> you can go to the display field which contains the active
4. By pressing the toggle key <SELECT>, you can select the radius type.
50
Machine Plus".
Figure 5-13
Radius turning
The "Radius turning" can be exited by pressing the "Machining mode" softkey.
The three types available for radius turning differ in the specification of the values for
specifying the radius.
– Type A
– Type B
– Type C
radius type (on dark background).
Figure 5-14
Radius turning type A
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Manual Machine Plus Turning