Siemens SINUMERIK 802D sl Programming And Operating Manual page 55

Operating sequences
1. Select the function (e.g. "Drilling " > "Tapping") in the main screen of the "Manual
2. Parameterizing the function.
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Machine Plus".
Figure 5-18 Example of input fields
Note
A detailed parameter description of each function can be found in the relevant sections.
The following softkeys will support you with the parameterization and execution of
functions:
The actual position value of the relevant axis is transferred to the parameter input fields
when you press this softkey. The input field must be selected with the cursor keys,
otherwise the error message "This value cannot be accepted" is displayed when
accepting the axis position.
5.4 Manual machining using cycles (functions)
Manual machining
55