Table of Contents
Advertisement
Understanding the printer menus
Use
Print Directory
Asset Report
Network/Ports menu
Active NIC menu
Use
Active NIC
Auto
[list of available network cards]
Standard Network or Network [x] menu
Note: Only active ports appear in this menu.
Use
Energy Efficient Ethernet
Enable
Disable
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
To
Print a list of all the resources stored in an optional flash memory card or printer
hard disk.
Notes:
•
Job Buffer Size must be set to 100%.
•
Make sure that the flash memory or hard disk is working and installed
correctly.
Print a report containing asset information including the printer serial number
and model name.
To
Allow the printer to connect to a network.
Notes:
•
Auto is the factory default setting.
•
This menu item appears only if an optional network adapter is installed.
To
Reduce power consumption when the printer receives no data from the Ethernet
network.
Note: Enable is the factory default setting.
Set the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
•
If PCL SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
Set the printer to automatically switch to PS emulation when a print job requires it,
regardless of the default printer language.
Notes:
•
On is the factory default setting.
•
If PS SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
129
Advertisement
Table of Contents
