Table of Contents
Advertisement
Understanding the printer menus
Use
Timeouts
Print Timeout
Disabled
1–255
Timeouts
Wait Timeout
Disabled
15–65535
Timeouts
Job Hold Timeout
5–255
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Error Recovery
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255
To
Set the amount of time in seconds the printer waits to receive an
end‑of‑job message before canceling the rest of the print job.
Notes:
•
90 is the factory default setting.
•
When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
•
Print Timeout is available only when using PCL emulation.
This has no effect on PostScript emulation print jobs.
Set the amount of time in seconds the printer waits for additional
data before canceling a print job.
Notes:
•
40 is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation. This has no effect on PCL emulation
print jobs.
Set the amount of time the printer waits for user intervention
before it holds jobs that require unavailable resources and
continues to print other jobs in the print queue.
Notes:
•
30 is the factory default setting.
•
This menu appears only when a formatted printer hard disk
is installed.
Set the printer to restart when an error is encountered.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots the printer can
perform.
Note: 2 is the factory default setting.
Let the printer automatically continue printing from certain offline
situations when not resolved within the specified time period.
Note: Disabled is the factory default setting.
155
Advertisement
Table of Contents
