Removing A Halogen Light Assembly And The Meat Probe Jack - KitchenAid KEMS378S Technical Education

REMOVING A HALOGEN LIGHT ASSEMBLY
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug oven or disconnect power.
2. Open the lower oven door.
Halogen Lights
3. To remove a halogen light assembly:
a) Remove the screw from the lens.
Lens Screw
AND THE MEAT PROBE JACK
Meat Probe Jack
b) Unclip the lens from the socket and
remove the lens.
Lens Clip
c) Remove the halogen bulb from the
socket connector.
Halogen Bulb
d) Cut the wires near the socket body and
splice the new socket in its place.
Cut Socket Wires
4-34