Removing The Magnetron Thermostat And The Magnetron - KitchenAid KEMS378S Technical Education

27" & 30" electric built-in microwave/oven combination
Hide thumbs Also See for KEMS378S:
Table of Contents

Advertisement

REMOVING THE MAGNETRON THERMOSTAT
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug oven or disconnect power.
2.
Remove the oven from its mounting location
(see "Installation Information" in Section 2)
and pull it forward so that you can access
the top cover.
3.
Remove the four screws from the top cover
and remove the cover.
Screws (2 of 4)
Magnetron & Magnetron Thermostat
AND THE MAGNETRON
Top Cover
4.
To remove the magnetron thermostat:
a) Disconnect the two wire connectors
from the thermostat terminals.
b ) Remove the two screws from the ther-
mostat and remove the thermostat.
Wire Connectors
Magnetron Thermostat
5.
To remove the magnetron:
a) Remove the magnetron thermostat (see
step 4).
b) Remove the eight screws from the inner
cover and remove the cover.
Inner Cover Screws (3 of 8)
c) Remove the right screw from the mi-
crowave appliance manager board
bracket.
Continued on the next page.
4-9
Screw (1 of 2)
Bracket Screw

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kems308s

Table of Contents