F To C Conversion; Adjust Oven Temperature Calibration; Programming The Cavity Size; Keypads - KitchenAid KEMS378S Technical Education

FAHRENHEIT (° F) TO
CELSIUS (° C) CONVERSION
The temperature is preset in Fahrenheit, how-
ever it can be changed to Celsius.
To Change: Press OPTIONS and then "1" to
toggle temperature between Fahrenheit and
Celsius settings.
When in Fahrenheit, "°F" follows the oven
temperature.
When in Celsius, "°C" follows the oven tem-
perature.
ADJUST OVEN TEMPERATURE
CALIBRATION
1. Press OPTIONS and then "6" to set the
calibration.
2. On double oven only, press UPPER OVEN
or LOWER OVEN to select oven.
Each oven calibration can be independently
set.
3. Press "3" to increase and "6" to decrease
the temperature.
4. Press START to end calibration.

PROGRAMMING THE CAVITY SIZE

A. Unplug oven or disconnect power.
B. Wait 10 (ten) seconds, plug in oven or re-
connect power.
C. Enter Diagnostics mode by pressing OFF,
OFF, START.
D. Press key #6 to show cavity size select
screen.
E. To edit press CLOCK key.
F. Scroll through cavity sizes by pressing key
#6 until size required is displayed.
G. Once correct size is displayed, press the
START key to accept modification.

KEYPADS

Main Cavity
Temperature Secondary
cavity temperature
Upper
scrolling
text line
Lower scrolling text line
Model Select State
02
01
6-7
Model select state
Door switch state
Latch switch state
Warm drawer
Meat probe
temperature
temperature
(if applicable)
Sensor
temperature
Door switch state
display
Model
select state
Description
27" Combo Microwave Upper/
Thermal Convection Lower
30" Combo Oven Microwave
Upper/Thermal Convection Lower