KitchenAid KEMS378S Technical Education page 51

9. To remove the latch motor, remove the
two motor screws from the bottom of the
assembly.
Latch Motor Screws
10. To remove the door or latch switch,
remove the bracket screw. NOTE: You will
have to remove the latch motor (in step 9) to
access the door or latch switch screws.
Door Switch Screw
REASSEMBLY NOTE: After you reinstall the
door latch assembly in the oven, press the two
covers back down into place. Use a piece of
shipping tape and tape over the front edge of
the top cover to hold it in place and keep it from
vibrating during operation.
4-29
Latch Switch Screw