Intel 80C186EA User Manual page 357

INSTRUCTION SET DESCRIPTIONS
Name
JCXZ Jump if CX Zero:
JCXZ disp8
Transfers control to the target location
if CX is 0. Useful at the beginning of a
loop to bypass the loop if CX has a
zero value, i.e., to execute the loop
zero times.
Instruction Operands:
JCXZ short-label
JE Jump on Equal:
JZ Jump on Zero:
JE disp8
JZ disp8
Transfers control to the target location
if the condition tested (ZF = 1) is true.
Instruction Operands:
JE short-label
JZ short-label
JG Jump on Greater Than:
JNLE Jump on Not Less Than or Equal:
JG disp8
JNLE disp8
Transfers control to the target location
if the condition tested (SF = OF) and
(ZF=0) is true.
Instruction Operands:
JG short-label
JNLE short-label
JGE Jump on Greater Than or Equal:
JNL Jump on Not Less Than:
JGE disp8
JNL disp8
Transfers control to the target location
if the condition tested (SF=OF) is true.
Instruction Operands:
JGE short-label
JNL short-label
NOTE: The three symbols used in the Flags Affected column are defined as follows:
– the contents of the flag remain unchanged after the instruction is executed
? the contents of the flag is undefined after the instruction is executed
ü
the flag is updated after the instruction is executed
C-22
Table C-4. Instruction Set (Continued)
Description Operation
if
(CX) = 0
then
(IP) ← (IP) + disp8 (sign-ext to 16 bits)
if
(ZF) = 1
then
(IP) ← (IP) + disp8 (sign-ext to 16 bits)
if
((SF) = (OF)) and ((ZF) = 0)
then
(IP) ← (IP) + disp8 (sign-ext to 16 bits)
if
(SF) = (OF)
then
(IP) ← (IP) + disp8 (sign-ext to 16 bits)
Flags
Affected
AF –
CF –
DF –
IF –
OF –
PF –
SF –
TF –
ZF –
AF –
CF –
DF –
IF –
OF –
PF –
SF –
TF –
ZF –
AF –
CF –
DF –
IF –
OF –
PF –
SF –
TF –
ZF –
AF –
CF –
DF –
IF –
OF –
PF –
SF –
TF –
ZF –