NEC Electra Elite IPK II System User Manual page 1176

Document Revision 4C
To program a key, press Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
Use this key...
Code: 27
Operation: Press
key + bin + Line or
Speaker key
Code: 28
Operation: Press
key + bin + Line or
Speaker key
Code: 29
Operation: Place
call + Press key
Code: 30
Operation:
Save: Place call +
Press key
Redial: Line or
Speaker key +
Press key
Code: 31
Operation:
Store: While on call,
Press key + number
to store
Use: Press key +
Speaker key or line
Erase: Speaker key
+ Press key
Code: 33
Operation: Call
ext. and receive
busy + Press key
Code: 34
Operation: Call ext
+ Press key
Code: 35
Operation: Call
busy extension or
access busy trunk +
Press key
Code: 36
Operation: Dial
busy ext + Press
key
Code: 37
Operation: Call
extension + Press
key
3 - 32
Table 3-5 Function Key Codes by Number (Continued)
press the key and enter the code (e.g., 48 for Voice Over).
For this feature...
Speed Dialing
Repeat Redial
Save Number Dialed
Memo Dial
Off-Hook Signaling
Barge-In
Callback / Camp-On /
Trunk Queuing
Department Step Calling
Call Forwarding / Do Not
Disturb Override
When you...
Dial a stored System Speed
Dialing number
Dial a stored Group Speed
Dialing number
Activate repeat redial while
on a call
Save, redial or check a saved
number
Store, use or check a Memo
Dial number
Signal a busy extension
Barge-In on a co-worker's
conversation
Leave a Callback request at
a busy extension, Camping
On to a busy extension,
Queuing for a busy trunk
Step Call through a
Department Group for an idle
member
Override an extension Call
Forwarding or Do Not Disturb
Electra Elite IPK II
Also see
Key Lamp Status
Srvc Code
#
None
#
None
Fast Flash while
system waits to
redial
None
None
None
None
On red when
activated
None
On red when
activated
Codes Tables
2 + bin
4 + bin
-
715
-
709
710
750
708
707