NEC Electra Elite IPK II System User Manual page 1016

Document Revision 4C
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Automatic Route Selection
Central Office Calls, Placing
Direct Inward Dialing (DID)
Dial Tone Detection
Multiple Trunk Types
Programmable Function Keys
Ringing Line Preference
Trunk Groups
Programming

11-01-01 System Numbering
Set up a Service Code for Alternate Trunk Route Access.

11-09-01 Trunk Access Code
If required, change the single-digit Trunk Access Code (normally 9). If you change this code, you
must also review the settings in PRG 11-01 for the new code selected.

11-09-02 Trunk Access Code – 2nd Trunk Route Access Code
Assign the Service Code set up in PRG 11-01 for Alternate Trunk Route Access.
2 - 992
Electra Elite IPK II
Trunk Group Routing