NEC Electra Elite IPK II System User Manual page 1171

Electra Elite IPK II
To program a key, press the Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
For this feature...
Memo Dial
Message Waiting
Microphone Cutoff
Call Arrival (CAR)
Keys
Name Storing
Networking
Night Service
Off-Hook Signaling
Paging, External
Paging, Internal
Codes Tables
Table 3-4 Function Key Codes by Feature (Continued)
press the key and enter the code (e.g., 48 for Voice Over).
Use this key...
Code: 31
Operation:
Store: While on call, press
key + number to store
Use: Press Key + Call or
line
Erase: Speaker key +
Press key
Code: 38
Operation: Leave
message: Call ext +
Press key OR Answer
message: Press key
Code: 02
Operation: Set up call +
Press key
Code: 03 + ext. or dept

group
Operation: Press key
Code: 55
Operation: Press key +
##
ext + name + Hold
Code: 06 + network

(01~50)
Operation: Press key
Code: 09 + mode (1~4 or
1~8)
Operation: Press key
Code: 33
Operation: Call ext. and
receive busy + Press key
Code: 19 + zone (1~8)
Operation: Press Key
Code: 20
Operation: Press key
Code: 21 + zone
(1~8, 1~9 or 01~64)
Operation: Press key
Code: 2
Operation: Press key
When you...
Store, use or check a Memo
dial number
Answer/Leave a
Message Waiting
Use Microphone Cutoff
Place or answer a call to your
virtual (phantom)
extension
Enter a name for the
extension to be displayed on
telephones
Access a networked trunk
Activate the Day/Night Mode
Signal a busy extension
Make an external zone page
Make an external All Call
page
Broadcast to an Internal
Paging Zone
Broadcast to all Internal
Paging zones
Document Revision 4C
Also See
Key Lamp Status
Srvc Code
None
None
On red when
activated
Slow Flash red
when ringing, On
red when busy
None
None
On red when
activated
None
On red when 703 + zone
activated
On red when
activated
On red when 701 + zone
activated
On red when 701 + 0 or 00
activated
-
0

-
-
700
-
718 +
+ 0
7
703 + 0
3 - 27