NEC Electra Elite IPK II System User Manual page 1094

Document Revision 4C
Related Features
Class of Service
Digital Voice Mail
Direct Station Selection (DSS) Console
IPK II In-Mail
Programmable Function Keys
Voice Mail Integration (Analog)
Programming

15-07-01 Programmable Function Keys
Assign DSS/BLF function keys on Multiline telephones (code 01 + extension number) or
Message Key (Code 77 + mailbox number).

20-13-41 Class of Service Options (Supplementary Service) – Voice Mail Message Indication on
DSS
Allow (1)/Deny (0) if the DSS/BLF key indicates when that extension has a new message waiting
in VM.
(default: 0)

30-01-01 DSS Console Operating Mode
Set the mode of the system DSS Consoles. The available options are Regular (Business) Mode
(0), Hotel Mode (1), and ACD Monitor Mode (2).
(default: 0)

30-02-01 DSS Console Extension Assignment – Extension Number
Enter extension numbers (up to eight digits) that have DSS Consoles connected to them).
(default: No Setting)

30-03-01 DSS Console Key Assignment
Customize DSS Console keys to function as DSS keys, Service Code keys, Programmable
Function Keys, and One-Touch Calling keys. The key (when defined as a DSS/One-Touch key
[code 01] can have any function with up to four digits (e.g., extension number or Service Code).
The function information (such as extension number or Service Code) would then be entered as
additional data.

30-05-02
through
30-05-21 DSS Console Lamp Table
If required, customize the system DSS Console flash rates (0~7). This table also affects DSS/
Hotline key lamping for multiline terminals.
2 - 1070 Voice Mail Message Indication on Line Keys
Electra Elite IPK II