NEC Electra Elite IPK II System User Manual page 1067

Electra Elite IPK II
Table 2-43 Maximum System Capacities for Application Interface ETUs (Continued)
Application
Interface ETUs
BSU(2S)-U20 ETU
BSU(6S)-U20 ETU
CCH(4)-U( ) ETU
HUB(8)-U( ) ETU
IAD(8)-U( ) ETU
configured for ESI
IAD(8)-U( ) ETU
configured for
CCISoIP
PVA(X)-U( ) ETU as
an IP Station
(MEGACO)–MG16
Universal Slots
Description
This Slave 2-Base Station Unit for
Wireless DECT has connections for
two Base Stations and must be used
with the BSU(4M)-U20 ETU. This ETU
is installed in the first or second slot to
the left of the BSU(4)-U20 ETU.
This Slave 6-Base Station Unit for
Wireless DECT has connections for six
Base Stations and must be used with
the BSU(4M)-U20 ETU. This ETU is
installed in the first or second slot to
the left of the BSU(4)-U20 ETU.
This 4-Channel – Common Channel
Handler (CCH) for K-CCIS provides
four K-CCIS routes to coordinate
receiving common channel data from a
distant system or to coordinate
sending it to a distant system.
This 8-port Switching HUB is an
optional Ethernet interface that
supports eight internet ports. Each
port has two LEDs that indicate status
and activity. One port can be a source
port, and another port can be used to
mirror source and monitor data traffic.
One ETU can be installed in slots
S1~S8 in each cabinet. This ETU
cannot be installed in a KSU that
contains EliteMail VP and IVR or CTI
and IVR systems.
For MEGACO Station
For CCISoIP
For MEGACO Station
Document Revision 4C
Maximum Capacities
Basic Port Expanded
Package Port Package
2 2
2 2
1 1
1 1
3 14
6 22
2 13
Notes
Notes 1, 2
Notes 1, 2
Note 1
Note 3
2 - 1043