NEC Electra Elite IPK II System User Manual page 1126

Hide thumbs Also See for Electra Elite IPK II System:
Table of Contents

Advertisement

Document Revision 4C
25-06-01
VRS/DISA One-Digit Code Attendant Setup – Next Attendant Message Number
Set up single digit dialing for Automated Attendant callers. For each VRS Message programmed
to answer outside calls (see Program 25-02-01), specify the digit the Automated Attendant caller
dials (1~9, 0,
cannot dial system extensions.)
[default: 0 (No Setting)]
25-06-02
VRS/DISA One-Digit Code Attendant Setup – Destination Number
Set up single digit dialing for Automated Attendant callers. For each VRS Message programmed
to answer outside calls (see Program 25-02-01), specify the destination reached (four digits
maximum) when the caller dials the single digit code.
25-07-02
System Timers for VRS/DISA – VRS/DISA No Answer Time
If an Automated Attendant caller dials an extension that does not answer, the call waits this time
(0~64800 seconds) before rerouting to the Ring Group specified in PRG 25-03 and PRG 25-04.
This setting also affects unanswered DISA calls.
(default: 0)
25-07-03
System Timers for VRS/DISA – Disconnect after VRS/DISA retransfer to IRG
Set the time (0~64800 seconds) for disconnecting a call after it is re-transferred to a ring group
by VRS/DISA.
(default: 60)
25-08-01
DISA User ID Setup – Password
Set up password (six digits).
(default: No Setting)
25-13-01
System Option for DISA – VRS Message Access Password
Enter the password DISA callers must dial before the system allows them to record, listen to or
erase VRS messages.
(default: No Setting)
31-02-01
Internal Paging Group Assignment – Internal Paging Group Number
Assign extensions to Internal Paging Groups (0~64).
[default: 0 (No Setting) for IP Station, 1 for TDM Station]
31-02-02
Internal Paging Group Assignment – Internal All Call Paging Receiving
Allow (1)/Prevent (0) All Call Internal Paging for each extension.
(default: 0)
31-04-01
External Paging Zone Group – Paging Group Number
(default: Speakers 1~8 = Groups 1~8, 9 (CPUII) = Group 1)
31-07-01
Combined Paging Assignments
Assign an external paging Group (0~8) to an Internal Paging Zone (0~64) for combined paging.
A combined Page simultaneously broadcasts to both the Internal and External Zones.
(default: 1)
2 - 1102
, #). (Keep in mind that if you assign destinations to digits 3 and 4, outside callers
Electra Elite IPK II
Voice Response System (VRS)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents