NEC Electra Elite IPK II System User Manual page 1009

Electra Elite IPK II

20-11-18 Class of Service Options (Hold/Transfer Service) – No Recall
Allow (0)/Deny (1) unanswered Transferred calls to the COS from recalling the originating
extension.
(default: 0)
For example, with this option set to 1 for COS 1, calls transferred by any COS to any extension with

a COS of 1, do not recall.

20-11-20 Class of Service Options (Hold/Transfer Service) – No Callback
Allow (0)/Deny (1) unanswered Transferred calls from the COS from recalling the originating
extension.
(default: 0)
For example, with this option set to 1 for COS 1, any call transferred by an extension with COS 1,

does not recall.

20-13-10 Class of Service Options (Supplementary Service) – Barge-In Monitor
Enable the Barge-In Speech Mode (0) at the initiating extension (i.e., Barge-In initiator). This is
required to transfer a call to a conference.
(default: 0)

20-13-15 Class of Service Options (Supplementary Service) – Barge-In, Initiate
Enable (1)/Disable (0) the ability to Barge-In to a call.
(default: 0)

20-13-16 Class of Service Options (Supplementary Service) – Barge-In, Receive
Enable (1)/Disable (0) the ability to receive a Barge-In on a call.
(default: 0)

20-13-17 Class of Service Options (Supplementary Service) – Barge-In Tone/Display (Intrusion
Tone)
Enable (1)/Disable (0) the Barge-In Tone. If disabled, this also turns off the Barge-In display at
the called extension. As this option is for extensions and trunks do not have an option for a
Barge-In Tone, the tone is sent to the trunks based on the Class of Service of the transferring
extension.
(default: 1)

20-13-32 Class of Service Options (Supplementary Service) – Deny Multiple Barge-Ins
Enable (1)/Disable (0) an extension user ability to have multiple users Barge-In to their
conversation.
(default: 0)

20-14-11 Class of Service Options For DISA/E&M – DISA/Tie Trunk Barge-In
Determine if DISA and tie trunk users should dial a service code to Barge-In to a conference call.
0 = Disabled
1 = Enabled
(default: 0)
Transfer
Document Revision 4C
2 - 985