NEC Electra Elite IPK II System User Manual page 1077

Electra Elite IPK II
Related Features
Call Queuing
Call Arrival (CAR) Keys
Secondary Incoming Extension
Programming

11-04-01 Virtual Extension Numbering
Assign Extension Number for the Virtual Extensions (1~256).
(default: 1~99 = 201~299, 100~256 = 3301~3457)

15-01-01 Basic Extension Data Setup – Extension Name
Assign Names for the Virtual Extensions (1~256).
(default: STA101 = Extension 101 = STA102 = Extension 102, etc.)

15-02-21 Multiline Telephone Basic Data Setup – Virtual Extension Access Mode (when idle Virtual
Extension key pressed)
Determine whether an extension Virtual Extension Key should be used as a DSS key to the
extension and for receiving calls (0), answering incoming calls and ability to place outgoing ICM
or CO calls (1), or just receiving incoming calls (2). If the key is to be used for outgoing calls, the
extension number of the key must be a real extension or virtual extension number. When the
extension number of the key is a real extension number, when the key is pressed, the real
extension cannot be used.
(default: 2)

15-02-30 Multiline Telephone Basic Data Setup – Toll Restriction Class
Assign if the phone uses the Toll Restriction class of the VE (0) or the Real Extension when
making outbound calls from the VE (1).
(default: 1)

15-07-01 Programmable Function Keys
Assign Virtual Extension function keys on Multiline telephones (code

15-08-01 Incoming Virtual Extension Ring Tone Setup
Assign a ring tone (0~4) to each extension port and virtual extension port assigned to a Virtual
Extension key. If ringing is enabled for the key in Program 15-09-01, the key rings with the tone
set in this program.
[default: 0 (Tone Pattern 1)]

15-09-01 Virtual Extension Ring Assignment
Individually program an extension Virtual Extension key(s) to either ring (1) or not ring (0).
(default: 0)
Virtual Extensions
Document Revision 4C
03 + extension number).

2 - 1053