NEC Electra Elite IPK II System User Manual page 1068

Document Revision 4C
Table 2-43 Maximum System Capacities for Application Interface ETUs (Continued)
Application
Interface ETUs
PVA(X)-U( ) ETU as
CCISoIP
Note 1: Refer to the KSU Power-Based Calculator Chart.
Note 2: A maximum of three Wireless – DECT BSU(4M)/(2S)/(6S) ETUs can be installed.
Note 3: The IAD(8)-U( ) ETU is assigned as a CCISoIP ETU and counts as eight trunk ports when installed with the IP
CCH ETU application loaded.
Note 4: The PVA(X)-U( ) ETU is assigned as a CCISoIP ETU and counts as 24-trunk ports when installed with the
CCISoIP application package.
Refer to the IPK II General Description Manual or System Hardware Manual for more

information.
COI/COID card will show as COI in 10-03-01, but with show correct in 90-34-01.

The following Card Calculator allows you to determine the maximum power consumption

for each cabinet.

The total point value cannot exceed 1000 points for the +5 voltage.


The total point value cannot exceed 1000 points for the -24 voltage.

Package Name
CPUI( )-U( ) ETU
CF ETU
EXP-U10 ETU
MOD-U10 Unit
BRT(4)-U( ) ETU
COI(4)-U10 ETU
2 - 1044
Description
For CCISoIP
Version 1500 or higher – 4-port
license registration provides users with
the flexibility of adding CCISoIP Ports
in increments of four (4, 8, 12, 16, 20
or 24) or (MG 16) DSP Resources in
increments of four (4, 8, 12, and 16).
Table 2-44 KSU Power-Based Calculator Chart
Maximum Capacities
Basic Port
Package
2
Power Consumption
+5V -24V
Common
200 0
7 0
6 0
25 0
Trunk
67 0
48 5
Electra Elite IPK II
Expanded
Port Package
11 Note 4
Equivalent Total
Power Point
Number
of ETUs
+5V
Universal Slots
Notes
-24V