NEC Electra Elite IPK II System User Manual page 1165

Electra Elite IPK II
For this feature...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker key first).
Transfer
Transfer (continued)
Trunk Group Routing
or Automatic Route
Selection
Trunk Queuing
Codes Tables
Table 3-3 Service Codes by Feature (Continued)
Dial this Service Code...
06

07

08

602 + Group number (1~8 or
01~64)
603+ Group number (1~8 or
01~64)
604 + Group number (1~8 or
01~64) + mode + extension
605 + Group number (1~8 or
01~64)
606 + Group number (1~8 or
01~64)
607 + Group number (1~8 or
01~64)
608 + Group number (1~8 or
01~64)
624 + Extension number
782
9
8

654
#
(Off-Hook)
1
When you...
Set the Automatic Transfer for each trunk
line
Cancel the Automatic Transfer for each
trunk line
Set the Destination for Automatic Trunk
Transfer
Set Automatic Transfer Setup for each
extension group
Cancel Automatic Transfer Setup
Set the destination for Automatic Transfer
Setup for each extension group
Set Delayed Transfer for each extension
group
Cancel Delayed Transfer
Set up DND for each extension group
Cancel DND for each extension group
Transfer a call into an existing call.
Transfer a call to the VRS. This can also
be used to route ANI/DNIS to the VRS.
Place a call using Trunk Group Routing or
Automatic Route Selection
Call your mailbox
Enable Conversation Record at SLT set
Camp-On to or leave a Callback at a busy
trunk
Document Revision 4C
Also see
Function
Key...
-
-
-
-
-
-
-
-
02

67
-
35
3 - 21