System Files; Figure 8-3 File Transfers To Or From A Unit - Honeywell Rapid Eye Administrator's Manual

Configuring Other Hardware

System Files

TIP!
144
Purpose
A unit's security settings need to be updated if a Multi SA adds, changes or removes:
• Alarm stations. See Adding an Alarm Station Name and
Making an Alarm Station Operational
• The system password. See
page 180.
• Authorized remote operators of a site. See
System on page 214.
• Authorized onsite operators. See
Removing a Site After Updating Security
After updating the security of a Multi-Media unit, care should be taken to make a record of
the system password. The system password is needed if you need to make a new site
definition for the Multi-Media unit. See
Your Multi System Administrator (Multi SA) or your organization's security officer may find
it useful to download a copy of a unit's System Log or other system file, as needed.
Downloads of files from a Multi-Media unit are safer than uploading files. Uploads should
be performed by trained personnel.
Figure 8-3 File Transfers to or from a Unit
Uploading and
promoting.
Sending a file to a
Multi-Media unit.
Check if the System Operational message appears in the Feedback box before
performing the procedure
on page 233.
System Password, page 184, and
Denying Access to a User of Your Multi
Central User Management
Deleting a Site on page 37.
Downloading.
Receiving a file from
a Multi-Media unit.
Downloading a File from a Multi-Media
Reports, page 218, and
Security Priorities on
on page 170.
Unit, page 145.