Adjusting The Time On An Operational Unit; Figure 4-4 Manually Setting A Multi-Media Unit Clock - Honeywell Rapid Eye Administrator's Manual

Unit Configuration Basics
Message
indicating that
the unit time and
PC time are NOT
synchronized.
Message
indicating that
the unit time and
PC time ARE
synchronized.

Adjusting the Time on an Operational Unit

68
Figure 4-4 Manually Setting a Multi-Media Unit Clock
Synchronizing Time Over Dial-Up
Due to the nature of dial-up connections, the Multi-Media unit's time may still be off by a few
seconds after synchronizing it.
Caution If a unit's clock is set incorrectly (more than +/- a few seconds), Honeywell
recommends setting a unit to the correct time (and date) as soon as
possible.
Human Error or Unauthorized Use
Leaving the clock set to an incorrect time (more than +/- a few seconds) for a long length
of time (an hour or more) on an operational unit, can create problems for operators who
need to retrieve video when the clock is set correctly.
During the span of incorrect time, video is not erased and continues to be recorded;
however, two instances of video can be created at the same timestamps. Using the Seek
or Jump controls shows the video of the first instance only. The second instance of video
can only be played through or fast-forwarded.
Click to
synchronize the
Multi-Media
unit's time with
your PC.