Remove Password From One Of Many Units - Honeywell Rapid Eye Administrator's Manual

Remove Password from One of Many Units

TIP!
Document 800-02953V4 Rev A
03/10
Caution If the system password is not removed from a unit, that system password
will need to be remembered when another site definition is created for that
unit. The system password is also needed if you delete a site definition by
mistake. See Adding a Site
You may need to remove a system password from only one unit in your system, when:
• Selling the unit to another organization.
• Sending the unit to Honeywell for repair.
If there is only one Multi-Media unit used by your organization, do not use the
following procedure. Please use
1. Check your Multi SA's password records to find the current system password on your
Multi-Media system. If the password is unknown, follow
Units, page 188, to change the system password on all units first.
2. Run Admin, to access the System Password window. Either:
• Click on the Admin toolbar.
• Click the System Password command in the File menu.
F8
• Press the key.
3. Delete the asterisks in the System Password and Confirm Password boxes. The two
boxes in the System Password window should now be empty (see
4. Click Save and Close.
5. Using View, start a Maintenance Session
system password. Either:
• Right-click the site name (on the Site tab) to select Maintenance from the
shortcut menu.
• Select the site. Click the Maintenance command in the Actions menu.
• Select the site, then click
6. Click the Security tab in the Maintenance window. Click Update Security. End the
Maintenance Session. See
7. You have the option of powering down the Multi-Media unit and disconnecting it from
your network or its telephone line.
8. Run Admin to access the System Password window.
9. Enter the system password used earlier in the System Password field (the password
that was removed in step 1 of this procedure). Re-enter the password in the Confirm
Password field.
10. Click Save and Close.
11. To follow-up:
• The Multi SA may need to tell some users that they need to refresh their copy of
the Multi db. See
• You have the option of deleting the site in the site list, as explained in
Site on page 37.
Rapid Eye Multi-Media DVR System Administrator Guide
on page 35, and
Remove Password from All
for site(s) from which you want to remove the
on the toolbar.
Ending Maintenance
Refreshing a Local Database
Deleting a Site on page 37.
Units, page 188.
Remove Password from All
Figure 10-4).
on page 71.
on page 277.
Deleting a
189