Entering Area Codes In Site And Alarm Station Definitions; Figure 11-7 Connection For An Alarm Station Shown In Site Definition Window - Honeywell Rapid Eye Administrator's Manual

Multi-Media Alarm Stations

Entering Area Codes in Site and Alarm Station Definitions

TIP!
226
6. Enter the alarm station's PPP User Name and PPP Password in their fields.
These can be obtained from your network administrator, as indicated in Overview,
page 217.
7. Enter the PPP password a second time in the Confirm PPP Password field.
8. Click Save and Close. In the Alarm Stations tab's Connection Method column, a
(d) appears, standing for dial-up, followed by the telephone number that calls the
Multi alarm station.
9. To finish preparing the alarm station, see
page 233.
When the country and area codes of an alarm station match those of the sites reporting to
it, calls to the alarm station are considered local. If they do not match, a long distance code
(1 by default plus an area code) is used to make the call. This is illustrated in
Long distance or local, Honeywell recommends that you enter long distance codes
for alarm stations and for Rapid Eye sites. The software can compare the phone
numbers more easily that way, suppress their display automatically as needed, and
avoid processing an error.
Figure 11-7 Connection for an Alarm Station Shown in Site Definition Window
Making an Alarm Station Operational on
Figure 11-7.