Removing Log Items; Alarm Log Data Reference; Table 14-1 Logged Data - Honeywell Rapid Eye Administrator's Manual

Alarm Log

Removing Log Items

Alarm Log Data Reference

Column
User Name
Site Name
Action
Action Time
Alarm Time
Sensor
Event
Description
262
1. While viewing the log (see
you want to delete. You can select more than one alarm by pressing the
keys while selecting alarms in the list.
2. Click Delete or press the
deletion is permanent. Click Yes to delete the items. Click No to cancel.
Caution An Access-type Multi db filling with alarms can become inoperable.
For more information on the type of data found in the alarm log, see
Table 14-1 Logged Data
Value
Name of user logged on to alarm station or
using alarm session.
Name as specified in the site definition.
New, Ack, Rearm
Date and universal coordinated time (UTC)
at which the action was taken.
Date and UTC of the alarm.
Multi input name for an Outside World
event.
The name of a Multi event that triggered the
alarm (or event from a customer device).
Shows the rule's description if the log was
triggered by a rule. Otherwise this field is
empty.
Viewing the Alarm Log, page 259), select the alarms that
Delete
key on the keyboard. You are warned that the
Section Reference
Using Admin and View to Create a
User
Adding a
Right to Use
n/a
n/a
Events
Events
Checklist for Setting a Rule in the
Response
Ctrl Shift
or
Table 14-1.
Account, page 171
Site, page 35
View, page 200
Defined, page 205
Defined, page 205
Schedule, page 124