Alarm Log; Viewing The Alarm Log; Figure 14-1 Viewing The Alarm Log - Honeywell Rapid Eye Administrator's Manual

Alarm Log

Viewing the Alarm Log

Log filtering
details
Document 800-02953V4 Rev A
03/10
During an alarm session, a record of the event that caused the alarm is entered in the
Alarm Log of the Multi central database (Multi db).
Alarm logs are a separate feature from the Archival logs. See
250 for more information on Archival logs.
Note Alarm log entries accumulate over time. Each alarm takes approximately 530
bytes. There can be many entries, as many as your database engine allows.
See your organization's database administrator for rules on managing the
size of the database.
Figure 14-1 Viewing the Alarm Log
To sort the log, click a column heading
The alarms produced in the last 24 hours are listed when the log is opened. The log can
appear to be empty if there have been no alarms on this day. Earlier alarms can be viewed
by filtering the log (see Filtering the Log
Report: alarms displayed / total alarms
on page 261).
14
Using Archival Logs on page
259