Rapiddome Mimic Tour; Testing A Mimic Tour On A Rapiddome Camera - Honeywell Rapid Eye Administrator's Manual

Multi-media digital video recorder
Hide thumbs Also See for Rapid Eye:
Table of Contents

Advertisement

Pan, Tilt, and Zoom (PTZ) Setup

RapidDome Mimic Tour

Testing a Mimic Tour on a RapidDome Camera

106
2.
Do one of the following:
For mimic tours, select Tour.
For preset tours, select Vector.
3.
Click a button in the row of numbered buttons above the drop-down list.
1.
While using View, select a site that has one or more RapidDome PTZ cameras.
2.
Run a
Maintenance
Session; click the Video tab.
3.
Select a dome camera.
4.
Click PTZ. Check if the Driver is RapidDome/Orbiter. If not, this procedure cannot be
used. In the Tour Programming section, Mimic Tour is selected by default. See
Figure
6-11. You have the option of selecting which of the four mimic tours you plan to
setup. To do so, click the drop-down arrow above the End button. A list appears,
showing Tour 1, Tour 2, Tour 3, and so on, by default. Select an item in the list.
Click Program. The message Tour Programming in progress ... appears below
5.
the buttons in the Tour Programming section (see
6.
Pan, tilt and zoom the camera, as needed.
7.
Click End.
8.
After the tour is programmed, you can:
Click Test to test the mimic tour.
Rename the mimic tour. Click inside the box in the Tour Programming section.
Enter a name. Save the name by clicking the mouse outside of the box.
9.
You have the option of programming another mimic tour for the dome camera; repeat
step 5
to
step
7, as needed.
1.
While using View, select the site at which you have programmed a mimic tour on a
RapidDome camera, as shown in
2.
Run a
Maintenance
Session. On the Video tab, select the dome camera that is
programmed with a mimic tour.
3.
Click PTZ. Check if the Driver is RapidDome/Orbiter. If not, the wrong camera or site
may have been selected and this procedure cannot be used.
4.
In the Tour Programming section, select a mimic tour, using the drop-down arrow
above the End button. By default, they are named Tour 1, Tour 2, Tour 3, and so on.
5.
Click Test.
Figure
6-11.)
RapidDome Mimic
Tour, page 106.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents