4.12 Optical disk drive (DVD-Super Multi drive)/SD board
2. Remove the following screws securing the SD board.
• M2×3B
3. Disconnect the inner harness from the connector CN6070 on the back of the SD
board.
4. Push the gasket and lift up the optical disk drive and SD board to remove. (SD
board FPC is fixed to the cover assembly by the double-sided tapes (D-tape circle).)
Inner harness
MIC cover
Figure 4-24 Removing the optical disk drive/SD board (2)
PORTÉGÉ R830/Satellite R830 Maintenance Manual (960-880)
S-THIN HEAD
M2x3B S-THIN HEAD
SD board
4 Replacement Procedures
×4
Optical disk drive
CN6070
[CONFIDENTIAL]
SD board FPC
Gasket
4-39