Toshiba PORTEGE R830 Maintenance Manual page 205

Tests and Diagnostics
Moving Within the SETUP Menu and Changing Values
1. Press  and  to move between the two columns. Press  and  to move between
items in a column.
2. Press either the [Enter]Key to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press [F10] key to accept the changes you made.
2. To make other changes, press N. Repeat the steps above.
3. To accept the changes, press Y.
NOTE: You can press Esc to quit at any time without saving changes. SETUP asks you
to confirm that you do not want to save your changes. When SETUP is displayed
at the next time, the current configuration appears.
The Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
1. To show the factory preset configuration, press [F9] key.
2. To accept the default settings, press [Y] key.
3-96 [CONFIDENTIAL])
PORTEGE R830 Satellite R830 Series Maintenance Manual (960-880)