Toshiba PORTEGE R830 Maintenance Manual page 230

■ In the case of FAIL
The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on
the WinPE T&D screen.
The detail of the error is printed to the log of WinPE T&D. Move details are as shown below.
Message
Read Hdd Create File
Error.Address=XX
Read Hdd Set File
Pointer Error.Address=XX
Read Hdd Command
Error.Address=XX
Read Hdd Check Size Error
Address=XX
PORTEGE R830 Satellite R830 Series Maintenance Manual (960-880)
Explanation
Failed in opening of HDD
driver.
XX is LAB value.
Failed in the HDD file
pointer setting command.
XX is LAB value.
Failed in the HDD read
command.
XX is LAB value.
The size read by the HDD
read command does not
correspond to the specified
size.
XX is LAB value.
Tests and Diagnostics
Remarks
The HDD driver may not
be normal or installed.
It indicates that a read
erroroccurred with the
specified value
[CONFIDENTIAL] 3-121