4 Replacement Procedures
Installing the HDD/SSD (2.5-inch)
To install the HDD/SSD (2.5-inch), follow the steps below and refer to Figure 4-7 and 4-8.
1. Connect the HDD/SSD to the connector on the HDD/SSD FPC.
2. Turn up the insulator and set the HDD/SSD into the slot.
3. Set the HDD/SSD cover and secure it with the screws.
NOTE: Be careful that the cushions of the HDD/SSD cover are different between the
7mm HDD and the 9,5mm HDD/SSD.
4-20
[CONFIDENTIAL]
PORTÉGÉ R830/Satellite R830 Maintenance Manual (960-880)
4.7 HDD/SSD