Toshiba PORTEGE R830 Maintenance Manual page 192

Subtest01 (i82562 + ICHx)
This subtest checks the operation of mini-PCI I/F by the loopback test in the
chip.
The following message will appear:
[LAN transmit & receive test !]
LOOPBACK TEST
100Mbps Auto-negotiation TxRx Test
Destination Address
Source Address
** 100Base-TX Full-Duplex **
< TRANSMIT >
< RECEIVE >
NOTE: The menu displayed by your computer may be slightly different from the one
shown above.
If a defective is found, NG message will appear in the display.
PORTEGE R830 Satellite R830 Series Maintenance Manual (960-880)
COMPLETED Repeat count =
Error count
= xxxxxxxxxxxx
= xxxxxxxxxxxx
[CONFIDENTIAL]
Tests and Diagnostics
00000
= 00000
3-83