Expansion Test - Toshiba PORTEGE R830 Maintenance Manual

Tests and Diagnostics

3.16 Expansion Test

To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press
Enter and follow the directions on the screen.
Subtest 01 PCMCIA wraparound [It is not supported]
CAUTION: PCMCIA wraparound test is not supported for this model.
NOTE: To execute this subtest, the PC card wraparound connector is required.
This subtest checks the following signal line of the PC card slot:
 Address line
 REG#, CE#1, CE#2 line
 Data line
 Speaker line
 Wait line
 BSY#, BVD1 line
This subtest is executed in the following order:
Sub# Address
01 00001
00001
02 00002
03 00003
04 00004
05 00005
NOTE: Select the subtest number01, The following message will appear:
Test slot number select (1:slot0, 2:slot1, 0:slot0&1)?
3-40 [CONFIDENTIAL])
Good
nn
nn
ww
––
40,80
nn
PORTEGE R830 Satellite R830 Series Maintenance Manual (960-880)
Bad Contents
xx Address line
xx REG#, CE#1, CE#2
nn=A0, 90, 80, 00
rr Data line
ww=write data, rr=read
data
–– Speaker line
xx Wait line (40<xx<80)
xx Other lines (BSY#, BVD1)
NN=21, 00