Toshiba PORTEGE R830 Maintenance Manual page 245

Tests and Diagnostics
3.34.6.10 IEEE1394 Test
1) Test content
This test accesses a file in the IEEE1394 device and verifies that the access can be made
correctly.
Create a file with the specified size in the IEEE1394 device and delete the file after creating
it
■ Simple Mode
This test mode creates a 4 MB file (Write), reads the file and compares it with the original
file.
■ Detail Mode
This test mode creates a 12 MB file (Write), reads the file and compares it with the original
file.
2) Test screen
▼ Test detail: The drive under test execution is displayed..
▼ Progress status: Displays the progress status of the test with the progress bar.
3) Result judgment
This test is regarded as 1PASS when every access to the files in all of the devices connected
to the PC is successful.
If an error occurs even in a device, the error count is incremented.
■ In the case of PASS
The PASS Count display on the test screen is zoomed in and (OK) is displayed in the Result
field on the WinPE T&D screen.
■ In the case of FAIL
The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on
3-136 [CONFIDENTIAL])
PORTEGE R830 Satellite R830 Series Maintenance Manual (960-880)