Toshiba PORTEGE R830 Maintenance Manual page 231

Tests and Diagnostics
3.34.6.2 HDD Logical Test
1) Test content
This test first verifies that the files which exist on the drive recognized as the built-in HDD
are read normally.
During the verification operation, the status update is performed sequentially (display of file
names in File Name) and when the verification reaches the last file, it is terminated.
■ Simple Mode
This test mode performs the read test to the first 400 files on the drive.
■Detail Mode
This test mode performs the read test to first 2000 files on the drive.
2) Test screen
▼ File Name: Displays the name of the file being verified with full path.
3) Result judgment
Both of PASS and FAIL are not displayed anywhere on the HDDL screen.
The result is reflected to the log on the WinPE T&D screen.
■ In the case of PASS
The result is displayed as (OK) in the Result field on the WinPE T&D screen.
■ In the case of FAIL
The result is displayed as (NG) in the Result field on the WinPE T&D screen.
The file name of the file in which an error occurred is printed to the log of WinPE T&D.
(The following example indicates the case where an error was found in file A .)
Name of file being verified
[HDDL]
ERROR0000=(2008/09/10, 12:00:00) C:¥file-A
3-122 [CONFIDENTIAL])
PORTEGE R830 Satellite R830 Series Maintenance Manual (960-880)