Report Options - Sam4s ER-650 Operation And Program Manual

Field
TYPE
IRC
OUTPUT
84 • X Mode
3. When a report is selected, the X REPORT OPTIONS screen displays:
X REPORT OPTIONS
RPT#: 1 FINANCIAL
1. TYPE
0:DAILY 1:PERIOD
2. 0:PRINT 1:DISP 0
3. IRC
0:STANDALONE
1:ALL 2:SELECT
4. Select the TYPE (DAILY or PERIOD), PRINT or DISPLAY, and the IRC
configuration. Refer to the explanations in the table below. Press ENTER
after each selection. After the last selection, the report will start.
5. If IRC is SELECT, then the register selection displays:
X REPORT OPTIONS
RPT#: 1 FINANCIAL
1. TYPE
0:DAILY 1:PERIOD
2. 0:PRINT 1:DISP 0
3. IRC
# 1 2 3 4 5 6 7 8
6. Press the YES/NO key at each register # to select whether you wish to include
each register in the consolidated report. Press ENTER after each selection.
After the last selection, the report will start.
Y Y N N N N N N
Description
Select X1 or X2 if available for the selected report.
Select STANDALONE, ALL, or SELECT if available for
the selected report. If SELECT, the screen will prompt for
selection of registers - the screen will initially show the
registers available from the from/to IRC register
programming, for example if the IRC range is from 1 to 3,
then the selection will default to:
1 2 3 4 5
Y Y Y N N
Select PRINT or DISPLAY output.
0
0
0
2
6 7 8
N N N
ER-650/650R