Cancel; Void Position Operations - Sam4s ER-650 Operation And Program Manual

Cancel

The CANCEL key allows you to stop any transaction. Anything registered within the
transaction before the CANCEL key is pressed is automatically corrected. The CANCEL
key can be inactivated through programming, see "Function Key Programming" in the
"Program Mode Programming" chapter, or the key can be programmed to require manager
control.
Note: When a function is located on a function look up menu key, you access the function
by pressing the appropriate function look up key, then pressing the numeric digit
corresponding to the function you wish to select. On the default keyboard, the CANCEL
function is function #1 on the function look up 1 menu, so to use the CANCEL function, you
would first press FUNCTION LOOK#1, then press the numeric 1 key.
1. Register the items you wish to sell.
2. Press the CANCEL key (or access the
CANCEL function from the function
look up menu.)
CANCEL

Void Position Operations

You can use the VOID control lock position to correct any complete transaction. To correct
any transaction:
1. Turn the control lock to the VOID
position.
2. Enter the transaction you wish to correct
exactly as it was entered originally in the
REG control lock position. You can
enter discounts, voids, returns, tax
exemptions or any other function.
3. All totals and counters are corrected as if
the original transaction did not take
place.
ER-650/650R
THANK-YOU
CALL AGAIN
DATE 08/15/1999 SUN TIME 08:33
PLU1 T1
PLU2
CANCEL *************************
CLERK 1 No.000011
THANK-YOU
CALL AGAIN
DATE 08/15/1999 SUN TIME 08:33
VOID MODE **********************
PLU1 T1
PLU2
TAX1 AMT
TOTAL
CASH
CLERK 1 No.000011
Operating Instructions • 49
$2.29
-0.50
00001
-2.29
-1.00
-0.14
-3.43
-3.43
00001