Sam4s ER-650 Operation And Program Manual page 161

Option
EMBEDED PRICE BAR
CODE TYPE 1/3/7
DISPLAY ADD PRICE OF
LINKED ITEMS
ALLOW SALE WITH 0
STOCK
ALLOW SWEDISH ROUND
ON SUBT
ON CASH
ALLOW Z STOCK RPT
PRG DESC BY CODE
EFT DRAFT IS
MSR CONNECTED
ER-650/650R
Entry Description
1, 3, or 7 Enables price embedded bar codes:
1 = Type 1 embedded bar codes with a price check sum.
3 = Type 3 embedded bar codes without a check sum.
7 = Choose 7 if you are embedding a weight, rather than a
price. Use weight when different items are sold in bulk,
such as nut/bolts in a hardware store. When a weight
embedded bar code is scanned the weight is displayed and
must be extended by a price at the cash register.
Y or N When Y, the customer display shows a total of the item and
linked item. For example, if PLU is $1.00 and is linked to
PLU2 which is $0.25, the customer display will show $1.25.
Y or N When N, inventory PLUs cannot be sold when stock reaches
"0".
Y or N Swedish rounding rounds as below:
Y or N When N, the operator is not allowed to clear (Z) stock.
Y or N When N, program descriptors by pressing the appropriate
key on the program overlay. When Y, program descriptors
by typing the code for each descriptor character.
Y or N Set EFT DRAFT to Y (DATATRAN) for a normal draft.
Set EFT DRAFT to N (FINE DINING) for a draft with a tip
entry line.
0 or 1 Set MSR CONNECTED to 0 if the MSR is connected to the
DATATRAN. SET to 1 if the MSR is connected to the
PDC.
.00 - .02 = .00
.03 - .07 = .05
.08 - .09 = .10
Program Mode Programming • 149