Initial Clear - Sam4s ER-650 Operation And Program Manual

Initial Clear

CAUTION: Do not share this information with unauthorized users. Distribute the P-
Mode key only to those you may want to perform this function.
The initial clear function allows you to exit any register activity and return to a beginning or
cleared state. Any transaction that is in progress will be exited and totals for that transaction
will not be updated.
Here are some reasons you may want to perform an initial clear:
Perform this procedure only as necessary. Contact your dealer first if you have questions
about operating or programming your ER-650/650R.
To Perform an Initial Clear:
18 • Getting Started
•
The register is in an unknown state, and you wish to exit the current program or
transaction without following normal procedures.
•
You have performed a function that includes a compulsory activity, such as
validating or printing, and you wish to bypass the compulsory activity.
•
An initial clear may be necessary as part of servicing, or troubleshooting a ER-
650/650R register or system.
1. Turn the power switch located on the right side of the register to the OFF
position.
2. Turn the control lock to the PGM position.
3. Press and hold the key position where the SBTL key is located on the default
keyboard layout.
4. While continuing to hold the SBTL key, turn the power switch to the ON
position.
5. The message "INITIAL CLEAR SERV". will display momentarily when the
initial clear is complete.
4 5 6
1 2 3
.
0 00
ER-650
CHECK
SBTL
CASH
TO INITIALIZE:
Press and hold the SBTL key
position during power-up in
PGM mode.
%1 %2
28
SUBTOTAL
29
CASH/ENTER
30
ER-650R
ER-650/650R