96 • Z Mode
3. With the cursor pointed at the first position of the PLU LOOKUP screen, select
a PLU by typing the PLU number and pressing ENTER. The descriptor for the
PLU will display, and the cursor will advance to the next position.
1.
2.
3.
4.
5.
6.
7.
8.
4. Continue to select PLUs for the PLU LOOKUP key as necessary. If you are
editing an existing PLU LOOK UP key, press ENTER to advance the cursor
without changing the current line.
5. If you wish to remove an item from the PLU LOOKUP key, place the cursor on
the line to be removed, press the VOID key.
6. Press ESC to return to the RESET REPORT MODE menu and save changes.
PLU123
0
0
0
0
0
0
0
ER-650/650R