Financial Report - Sam4s ER-650 Operation And Program Manual

Financial Report

The Financial Report selection allows you to reprogram the descriptors that appear with the
Financial Report totals and counters. For example, the first total on the financial report
"+PLU TTL" represents the total of all positive PLU entries. You might wish to re-label
this total to say "FOOD SALES". You can reprogram any of the Financial Report totals
listed here with any 12-character descriptor.
214 • Program Mode Programming
1. From the LOGO DESC. PROGRAM screen, press 3 to display the
FINANCIAL REP MESG. Screen:
FINANCIAL REP MESG.↓
TTL 1 :
+PLU TTL
TTL 2 :
-PLU TTL
TTL 3 :
ADJST TTL
2. The first 3 report descriptors (TTLs 1-3) display with the cursor arrow pointing at
the first descriptor. Using the alpha numeric keyboard overlay, type the
descriptor. You can also program by using the descriptor code method (see
page 117.) Each descriptor can be up to 12 characters. If you make a mistake,
press the BACKSPACE key to erase the previous character. After you have
completed typing the first descriptor, press ENTER to accept the new message
and advance to the TTL, or press ESC to return to the LOGO DESC.
PROGRAM screen without making any changes.
3. Press ENTER repeatedly, or press PAGE UP and/or PAGE DOWN to locate
the next descriptor you wish to program. After the last item on each screen, the
screen shifts to display the next 3 descriptors. (There are 73 Financial Report
descriptors that you may program.) Using the same procedure, continue
programming each line as necessary. Press ESC at any time to exit and return
to the LOGO DESC. PROGRAM screen.
ER-650/650R