Sam4s ER-650 Operation And Program Manual page 184

CHARGE 1-8 Key Program Notes
Option
DESC
HALO
AMOUNT TEND
COMP.
OVER/UNDER
TENDER IN MGR
CONTROL
DISABLE UNDER
TEND.
DOES DRAWER
OPEN
ALLOW OVER
TEND.
NON-ADD # COMP.
EXEMPT TAX 1
EXEMPT TAX 2
EXEMPT TAX 3
EXEMPT TAX 4
COMPULSORY
VALIDATION
CONNECT EFT
SELECT (1:CREDIT
2:DEBIT, 3:GIFT)
172 • Program Mode Programming
Entry Description
Alpha numeric You can program a descriptor. The default descriptors are
12 character CHARGE 1-8.
7 digit amount You can limit errors by setting the maximum amount that can be
tendered. "0" means that there is no entry limit.
Y or N
Select Y if you want to force the operator to enter the tendered
amount and let the register calculate the change.
Y or N Select Y if you do not want the operator to tender more than the
amount of the sale and issue change. When selected, over
tendering is allowed only in the X control lock position.
Y or N
Select Y if you do not want the operator to tender less than the
amount of the sale.
Y or N
Select N if you do not want the drawer to opened with this key.
Y or N Select Y if you wish to allow tender greater than the amount of the
sale.
Y or N Select Y if you wish to enforce the entry of a non-add number
prior to tendering.
Y or N Select Y to exempt the appropriate tax automatically when
finalized with this key.
Y or N Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
Y or N Select Y if the DataTran is connected.
1, 2, or 3
At the SELECT field, select 1 (credit). Debit and Gift options are
not currently available. (Applies to DataTran operations only.)
ER-650/650R